Palm Tungsten W - Manual (Page 314)

Chapter 20 Performing HotSync ® Operations
300
Selecting the conduits for a modem HotSync operation
The Conduit Setup dialog box on your handheld enables you to define which files
and/or applications synchronize during a modem HotSync operation. You can use
these settings to minimize the time required to synchronize data with a modem.
To change the Conduit Setup for a modem HotSync operation:
1. Press Home .
2. Tap the HotSync icon .
3. Press Command Stroke + D.
Alternately, press Function + Menu , and then select Conduit Setup on
the Options Menu.
4. Tap the check boxes to deselect the files and applications that you do not want
to synchronize during a modem HotSync operation. The default setting is to
synchronize all files.
Applications that do not have a database (such as games) do not synchronize,
even if you select the item in the Conduit Setup dialog box.
5. Tap OK.
Performing a HotSync operation using an attached modem
After you prepare your computer and your handheld and select your Conduit
Setup options, you are ready to perform a modem HotSync operation.
To perform a modem HotSync operation:
1. Press Home .
2. Tap the HotSync icon .
3. Tap the Modem icon to dial the Palm Desktop modem and synchronize the
applications.
4. Wait for the HotSync operation to complete. If you have any problems
conducting a successful HotSync operation, see
“HotSync problems” in
Appendix B .