Pelco ESPRIT ES30PC - Manual (Page 24)

24 C311M-N (6/06)
ALERT DISPLAY POSITION
Screen positioning of the alert label is user-defined. Positioning options include the following:
To set the alert label position:
1. Program preset 95 (28). The main menu appears.
2. Position the cursor (>) beside Alert.
3. Press the Iris Open button to enter the Alert menu.
4. Position the cursor (>) beside Disp Pos.
5. Press the Iris Open button. The cursor moves to the right.
6. Move the joystick up or down to make a selection.
7. SELECT: Press the Iris Open button on your keyboard to select your choice.
CANCEL: Press the Iris Close button if you do not want to change the setting.
<Camera>
<Line Sync>
<Power Up>
<Wiper>
<Limit Stop>
<Alert>
<Other>
ACK Alert
Exit
MAIN MENU
Repeat Constant
Disp Pos
Top Right
ACK Act Always On
<Currrent Reading>
Alert Reset
Exit
Alert Menu
Top Left Top Right
Center
Bottom Left Bottom Right