Pelco ESPRIT ES30PC - Manual (Page 48)

48 C311M-N (6/06)
RESET CAMERA
Resetting the camera returns the settings to their defaults.
Turning off power does not reset the camera. Camera settings are retained in memory. When the power is turned back on, the settings will be the
same as they were when the power was turned off.
To reset the camera:
1. Program preset 95 (28). The main menu appears.
2. Position the cursor (>) beside Camera.
3. Press the Iris Open button to enter the Camera menu.
4. Position the cursor (>) beside Reset Camera.
5. Press the Iris Open button to reset the camera.
Default Setting
Models
ES30PCBW24/
ES31PCBW24/
Models
ES30PC22/
ES31PC22/
Models
ES30PC16/
ES31PC16/
Backlight comp Off Off Off
Zoom Limit No default No default No default
Gain/AGC
Gain Limit 25 29 27
Auto iris
Mode
Level
Peak
NTSC PAL
Auto Auto
106 96
16 16
Auto
66
16
NTSC PAL
Auto Auto
66 57
8 16
Low light limit 2 2 N/A
Shutter speed Auto Auto Auto
Auto focus mode Auto Auto Auto
IR Filter
IR filter mode
Auto IR level Auto
Dusk N/A
N/A N/A
N/A
Sharpness
Auto sharpness
Sharpness On
No default
On
No default
On
No default
White balance
Auto white bal
R Gain
B Gain On
No default
No default
On
No default
No default
On
No default
No default
Backlight comp Off
Zoom limit x- -
Reset camera
<Gain/AGC>
<Auto iris>
Next
Exit
Camera Menu
<Camera>
<Line Sync>
<Power Up>
<Wiper>
<Limit Stop>
<Alert>
<Other>
ACK Alert
Exit
MAIN MENU