Alert repeat – Pelco ESPRIT ES30PC User Manual
Page 25
C311M-N (6/06)
25
ALERT REPEAT
You can program how often an ALERT label is repeatedly displayed until it is acknowledged by the system controller. The following settings are
available:
•
Constant:
The ALERT label is continually displayed on the monitor until acknowledged.
•
15 min off:
The ALERT label is displayed every 15 minutes for a 15-second duration until acknowledged.
•
30 min off:
The ALERT label is displayed every 30 minutes for a 15-second duration until acknowledged.
•
60 min off:
The ALERT label is displayed every 60 minutes for a 15-second duration until acknowledged.
To program the alert repeat setting:
1. Program preset 95 (28). The main menu appears.
2. Position the cursor (>) beside Alert.
3. Press the Iris Open button to enter the Alert menu.
4. Position the cursor (>) beside Repeat.
5. Press the Iris Open button. The cursor moves to the right.
6. Move the joystick up or down to select the repeat setting.
7.
SELECT:
Press the Iris Open button on your keyboard to select your choice.
CANCEL:
Press the Iris Close button if you do not want to change the setting.
<Camera>
<Line Sync>
<Power Up>
<Wiper>
<Limit Stop>
<Alert>
<Other>
ACK Alert
Exit
MAIN MENU
Repeat Constant
Disp Pos
Top Right
ACK Act
Always On
<Currrent Reading>
Alert Reset
Exit
Alert Menu