Pelco ESPRIT ES30PC - Manual (Page 38)

38 C311M-N (6/06)
IR FILTER MODE (MODELS ES30PCBW24/ES31PCBW24)
There are two settings for the IR filter mode:
IMPORTANT: Automatic shutter speed must be set to Auto for the IR filter to operate automatically. If the automatic shutter speed is disabled,
the IR filter setting will automatically switch to OFF.
• Auto: IR filter switches in and out automatically.
NOTE: (ES30PCBW24/ES31PCBW24) If the IR Filter Mode is set to Auto, the Shutter Speed setting will default automatically to Auto setting.
• Off: IR filter is manually operated. The following presets are used to manually operate the IR filter.
Preset 88: Filter IN (color)
Preset 89: Filter OUT (monochrome)
To change the lR filter mode:
1. Program preset 95 (28). The main menu appears.
2. Position the cursor (>) beside Camera.
3. Press the Iris Open button to enter the Camera menu.
4. Position the cursor (>) beside Next.
5. Press the Iris Open button to enter the Next menu.
6. Position the cursor (>) beside IR Filter.
7. Press the Iris Open button to enter the IR Filter menu.
8. Position the cursor (>) beside IR Filter mode.
9. Press the Iris Open button. The cursor moves to the right, beside the word Auto or Off.
10. Move the joystick up or down to toggle between Auto and Off.
11. SELECT: Press the Iris Open button on your keyboard to select your choice.
CANCEL: Press the Iris Close button if you do not want to change the setting.
Backlight comp Off
Zoom limit x- -
Reset camera
<Gain/AGC>
<Auto iris>
Next
Exit
Camera Menu
<Camera>
<Line Sync>
<Power Up>
<Wiper>
<Limit Stop>
<Alert>
<Other>
ACK Alert
Exit
MAIN MENU
LowLight limit Auto
Shutter speed Auto
Auto focus mode Auto
<IR Filter>
<Sharpness>
<White balance>
Prev
Exit
Next Menu
IR filter mode Auto
Auto IR Level Dusk
Exit
IR Filter Menu