Panasonic KX-TD612NZ - Manual (Page 134)

Operation
134 User Manual
2.8.5 Automatic Selection of Calling/Connected Line
Identification Presentation (CLIP/COLP)
Automatically selects the pre-assigned CLIP/COLP number on the opposite party’s display. You can
assign 2 CLIP numbers and 2 COLP numbers per a group of CLIP/COLP assignment table, or per
an ISDN port. One number is for business and other is for private.
CLIP :
When making a call, you can let the other party see your pre-assigned identification number.
COLP :
When receiving a call, you can let the party calling you see your pre-assigned identification number.
The selection of CLIP/COLP per an ISDN port is prior to the selection of CLIP/COLP per a group of
System Speed Dialling and Intelligent Call Handling number.
Presenting CLIP/COLP assigned per a group of System Speed Dialling and
Intelligent Call Handling number
You can present your CLIP or your COLP for the parties that phone numbers are stored in System
Speed Dialling and Intelligent Call Handling (SSD and ICH) table. There are up to 7 CLIP/COLP
group numbers (0-6) that are based on 100-segment of SSD and ICH table. For example, when
making a call to Ms. A, that phone number is stored at SSD and ICH table 000, you can present one
of the CLIP numbers (business or private) assigned in group number 0. When receiving a call with
your DDI/MSN number stored at SSD and ICH table 500, one of the COLP numbers assigned in
group 5 will be presented.
Directory
— Presenting CLIP/COLP assigned per a
group of System Speed Dialling and
Intelligent Call Handling number — Presenting CLIP/COLP assigned per a
ISDN (BRI) port
SSD and ICH number Group no. Your CLIP no. Your COLP no.
SSD and ICH 000
100
200
300
400
500
600
099 0
Business
Private
Business
Private
Business
Private
Business
Private
Business
Private
Business
Private
Business
Private
1
2
3
4
Not applicable
Not applicable
5
6
199
299
399
499
599
699
SSD and ICH
SSD and ICH
SSD and ICH
SSD and ICH
DDI/MSN and ICH
DDI/MSN and ICH