Panasonic KX-TD612NZ - Manual (Page 208)

Customising Your Phone & System
208 User Manual
Confirmation
To confirm your entry after storing data;
• The STORE button light: Lights red.
• Confirmation Tone:
— 1 beep: Your entry is accepted.
— 3 beeps: Your entry is rejected.
Icon Descriptions
Icons are given to guide you through programming. The following is an example of how the icons may
be used:
Procedure
The basic steps are shown below.
Enter the programme number. (xxx= the specified number)
Press the corresponding button on the telephone or the Soft button which
corresponds to the display.
<Example>
: "NEXT" is displayed.
In this case, both of the following methods are available:
• Press the NEXT ( ) button.
• Press the Soft button which corresponds to "NEXT" shown on the display.
( )
The display messages "SEL+, SEL- and SEL" mean "SELECT".
"CLR" means "CLEAR".
Press the button until the desired entry appears.
Enter your selection.
<Example>
: "Jack no." is displayed. Enter the jack number.
9 6 9
Dial 996. Press END. Press PROGRAM. Press PROGRAM.
After confirming If you do not know the jack/extension number
END
PROGRAM
PROGRAM
X X X
NEXT
NEXT
NEXT
jack no.