Panasonic KX-TD612NZ - Manual (Page 48)

Operation
48 User Manual
2.2.6 Changing the Mode
— Alternating the calling method
— Changing the dialling mode from pulse to tone
Alternating the Calling Method (Alternate Calling — Ring/Voice)
For voice-calling
For ring-calling
The calling method, either ring or voice, is set by the
called extension when an intercom call is received.
However, you can change the method temporarily.
Ring-calling (Default):
You can call the other party with a ring.
Voice-calling:
You can talk to the other party immediately after a
confirmation tone.
• If the called party uses a single line telephone, only Ring-Calling is available.
• You can switch the desired calling method only once during a call.
Customising Your Phone
• 4.1.2 Initial Settings—Intercom Alert Assignment
Which way do you prefer to receive an intercom call?
Ring
Ring Hello
OR
OR
Press “Voice” or .
DPT/SLT
Talk.
C.Tone
Voice
After dialling
OR
Press “Tone” or .
DPT/SLT
Tone
After dialling