Panasonic KX-TD612NZ - Manual (Page 66)

Operation
66 User Manual
2.3.5 Deflecting a Call (Call Deflection)
To deflect a call to your personal message box
To deflect a call to your mailbox
This is only available for the DPT with display which has more than two lines. If,
for example, you cannot answer the call because you are so busy, you can
transfer the call you are currently receiving to your personal message box (Built-
in Voice Message) or your mail box (Voice Processing System).
• If a call cannot be deflected because the voice message resource is busy, " BV.BOX Busy "
will be displayed for 3 seconds.
• If a call cannot be deflected because the voice message resource is full, " Voice Msg
Full " will be displayed for 3 seconds.
• If the OGM for your personal message box has not been stored, you cannot deflect the call.
• If you have set Call Forwarding — No Answer, " EXT " will be displayed at the bottom line.
To forward the call to the destination extension, press " EXT ".
• If you have set Call Forwarding — to CO Line, No Answer, " CO " will be displayed at the
bottom line. To forward the call to the destination, press " CO ". Availability of this feature
depends on the ISDN service of your telephone company.
• This feature is not available for Intelligent Call Handling 1:N calls.
DPT
Press "BV".
0123456789
BV
<Display Example: KX-T7433>
When receiving a call
DPT
Press "VM".
0123456789
VM
<Display Example: KX-T7433>
When receiving a call