Panasonic KX-TD612NZ - Manual (Page 171)

Operation
User Manual 171
Operation using the function buttons
1. Press the desired function button on the initial display.
2. Rotate the Jog Dial until the desired message is at the arrow.
(Refer to "Display feature list" in 2.10.3
Using the KX-T7431, KX-T7433, KX-T7436 or KX-T7235
for the feature messages.)
3. Press the CALL button or the function button to call the party. Or press the SEL button to select
the desired feature at the arrow or press the function button next to the desired feature.
4. Enter parameters if required.
<Example>
To select 111
1234567890
111
0987654321
000111222333
100200300400500
MENU CLR
Calling using names
and numbers stored
at your extension
(Station Speed
Dialling)*
Redialling using
one of the last 5
outside call
numbers
(Outgoing Call Log)
Calling an intercom
call using the
directory
(Extension Dialling)
Operating the various
features
(System Feature Access)
Calling using names
stored in the system
(System Speed Dialling)
If a parameter is required,
the parameter will flash.
: By pressing the corresponding function button,
you can perform the Automatic Redial.
SHIFT
RING BGM CONT
1 Jan 15:00
Extension STA Speed
Features SYS Speed
Call Log
NEXT MENU
Ronald
Zaydel
Adam
Alice
Ann Parker
MENU
CALL
→
NEXT MENU
Ann Parker
Beth
Bob Jones
Carol
Chris
MENU
CALL
→
NEXT MENU
Absent MSG Off
Absent MSG On (1-9)
C.Pickup Group
Call Park (0-9)
CM OGM PLAY (1-9)
MENU SEL
→
parameter
< Initial Display >