Phonetics Sensaphone ISACC 5000 - Manual (Page 26)

26
Sensaphone ® ISACC Instruction Manual
To configure P10 for 2400 bps, the shunts must be ON ON OFF:
1
2
3
P10
ON OFF
Shunt configuration for 2400 bps
To configure P10 for 4800 bps, the shunts must be OFF OFF ON:
1
2
3
P10
ON OFF
Shunt configuration for 4800 bps
To configure P10 for 9600 bps, the shunts must be ON OFF ON:
1
2
3
P10
ON OFF
Shunt configuration for 9600 bps
NOTE: Again, do not change the configuration of the shunts for local communication unless
you are positive that your PC cannot communicate at 9600 bps.
6. If you changed the position of the shunts, you must reset ISACC so that the unit can
recognize the new configuration. To do this press the reset button (a hole is provided in the
acrylic safety panel) or turn the ON-OFF switch off and back on again. If you did not
reconfigure the shunts, you do not need to reset ISACC.