Phonetics Sensaphone ISACC 5000 - Manual (Page 56)

56
Sensaphone ® ISACC Instruction Manual
Voice alarm repetitions = 4
On line time out (minutes) = 4
Acknowledge on carrier = YES
To change the global parameters, type set system after an ISACC prompt. Enter new infor-
mation after the prompt (>). Press ENTER to go to the next parameter:
ISACC>set system
SYSTEM INFORMATION
Unit identification = Snow >Sun
Phone number of unit = 555-4592 >555-5674
Data password = 23B79Q4 >123999
Network node = 1 >
Rings until answer = 3 >5
Phone dialing (0=pulse, 1=tone) = 1 >
Time between calls = 0 Min 30 Sec, New minutes > New seconds >
Wait time between rounds = 5 Min >3
Maximum number of calls = 3 >
Voice alarm repetitions = 4 >
On line time out (minutes) = 4 >
Acknowledge on carrier = YES (Y or N) >N
CLOCK
ISACC has a battery-backed real time clock that stores the time and date. This is a separate
battery, not the 18V battery. This KEYWORD will provide the current time and date and the
allow you to enter new settings.
To display the current time and date, type show clock after an ISACC prompt:
ISACC>show clock
The time is 08:47:27 AM
The date is 12/15/93
To change the time and/or date, type set clock after an ISACC prompt. Enter the new
information after the prompt (>). Time must be entered in 24 hour format, i.e. 0 = midnight.
Press ENTER to go to the next parameter:
ISACC>set clock
The time is 08:48:37 AM
The date is 12/15/93
Enter new time (hh:mm) >22:00
Enter new date (mm/dd/yy) >12/17/93
INPUTS
ISACC has 16 universal inputs. The command SHOW INPUTS will display all 16 inputs
with their names, values, status and limits. The command prefix SET is not valid with this
keyword. Refer to ITYPE, LIMITS, and RESET to change this information.