Phonetics Sensaphone ISACC 5000 - Manual (Page 47)

47
Chapter 5: Outputs
4. When using more than one DC device, you may wire all the device ground termi-
nals together, and wire the odd-numbered terminals on the 8-module rack together if
all the DC devices require the same voltage.
To wire an AC device to the 8-module rack using external AC power source:
1. Wire the HOT terminal on the external AC power source to an even-numbered
terminal on the 8-module rack.
2. Wire the NEUTRAL terminal on the external power source to one of the AC
device terminals.
3. Wire the other AC device terminal to an odd-numbered terminal on the 8-module
rack.
4. When using more than one AC device, you may wire the even-numbered terminals
on the rack together, and wire the neutral terminals on the AC devices together.
See diagram below:
1
6
1
5
1
4
1
3
1
2
1
1
1
0
9
8 7
6
5 4 3
2 1
1 25
2IO-8
DC device
+
G
DC device
+
G
DC device
+
G
DC device
+
G
AC device
AC device
AC device
AC device
POWER
AC external
power supply
HOT
NEUTRAL
EG 24 24 BAT C 20V C
15V C
12V C 5V C
AC AC
AC output
AC output
DC output
DC output
DC output
DC output
AC output
AC output 0 1 2 3 4 5 6 7
Wiring the AC and DC devices to the 8-module rack
Below is a pin-out of the digital outputs DIP connector:
25 +5V
23 Output 1
21 Output 2
19 Output 3
17 Output 4
15 Output 5
13 Output 6
11 Output 7
9 Output 8
7 N.C.
5 N.C.
3 N.C.
1 +12V Common 26
Common 24
Common 22
Common 20
Common 18
Common 16
Common 14
Common 12
Common 10
Common 8
Common 6
Common 4
Common 2
P14
26-pin DIP header at P14