Phonetics Sensaphone ISACC 5000 - Manual (Page 20)

20
Sensaphone ® ISACC Instruction Manual
FCC REQUIREMENTS
PART 68 - This equipment complies with Part 68 of the FCC rules. On the acrylic panel there
is a label that contains, among other information, the FCC Registration Number and the Ringer
Equivalenzce Number (REN) for this equipment. You must, upon request, provide this informa-
tion to your local telephone company.
The REN is useful to determine the quantity of devices that you may connect to your telephone
line and still have all of those devices ring when your telephone number is called. In most, but
not all areas, the sum of the REN’s of all devices connected to one line should not exceed five
(5.0). To be certain of the number of devices that you may connect to your line, you may want
to contact your local telephone company to determine the maximum REN for your calling
area.
This equipment may not be used on coin service provided by the telephone company. Con-
nection to party lines is subject to state tariffs.
Should ISACC cause harm to the telephone network, the telephone company may discontinue
your service temporarily. If possible, they will notify you in advance. But if advanced notice
isn’t practical, you will be notified as soon as possible. You will be informed of your right to
file a complaint with the FCC. The telephone company may make changes in its facilities,
equipment, operations, or procedures that could affect the proper functioning of your equip-
ment. If they do, you will be notified in advance to give you an opportunity to maintain
uninterrupted telephone service.
If you experience trouble with this equipment, please contact:
PHONETICS, INC.
901 Tryens Road
Aston, PA 19014
(610) 558-2700
Fax: (610) 558-0222
http:www.sensaphone.com
for information on obtaining service or repairs. The telephone company may ask that you
disconnect this equipment from the network until the problem has been corrected or until you
are sure that the equipment is not malfunctioning.
PART 15 - This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio frequency
energy and if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.