Panasonic RAMSA WR-DA7 - Manual (Page 31)

2 - 5
Previous Versions: SURROUND MONITOR MASTER LEVEL was only
accessed from within the [SOLO/MONITOR] window.
Version 2.0: The SURROUND MONITOR MASTER LEVEL can be adjusted
using the AUX SEND LEVEL knob in the AUX section on the Top Panel of the
DA7. When the SURROUND MONITOR is ENABLED from the
[SOLO/MONITOR] window, and the individual CHANNEL [PAN/SURROUND]
window is displayed, the MASTER LEVEL of the SURROUND MONITOR buses
can be adjusted using the AUX SEND LEVEL knob in the AUX section on the
Top Panel of the DA7.
4. New shortcuts for the Set up Windows.
Previous Versions: Not Implemented (This shortcut was introduced in
Version 1.10.)
Version 2.0: The Windows for the various Set-Up functions can now be
directly accessed by pressing the desired Set-Up keys, then enter the number
of the Window using the 10 Keypad. Of course, you must be familiar with the
Windows of the DA7 to go directly to them! The following chart shows the
Set Up buttons, the 10 Key # to press, and which of the Windows is recalled:
SET UP KEY TEN KEY NUMBER WINDOW RECALLED
(Window Group)
[UTILITY] [1] [UTILITY>OSC/BATT]
[UTILITY] [2] [UTILITY>CONFIG]
[UTILITY] [3] [UTILITY>USR CSTM]
[MIDI] [1] [MIDI>SETUP]
[MIDI] [2] [MIDI>PRG ASGN]
[MIDI] [3] [MIDI>CTRL ASGN]
[MIDI] [4] [MIDI>BULK]
[MIDI] [5] [MIDI>MIDI RMT]
[D-I/O] [1] [D-I/O>INPUT SET]
[D-I/O] [2] [D-I/O>TO SLOT]
[D-I/O] [3] [D-I/O>DITHER]
[GROUP] [1] [GROUP>FADER GRP]
[GROUP] [2] [GROUP>MUTE GRP]
[GROUP] [3] [GROUP>LINK/STR]
To be continued