Panasonic RAMSA WR-DA7 - Manual (Page 56)

3 - 1 4
16. New feature implements an Input to Output Routing Window
Previous Version: Not implemented
Version 2.0: This is a New Window. The [ROUTING] in [GROUP] window
group is used for selecting the routing of the Inputs and Aux Returns to Bus,
Master LR, and Surround Enable/Disable.
If the Input or Aux Return channel is selected to Stereo, then the Center Line
between the Odd and Even channels will disappear. (e.g. at above graphics,
INPUT 3 and 4.)
If the Bus channel is selected to Stereo, then the BUS channel is toggled and
is displayed in inverse video. (e.g. at above graphics, BUS 5,6, and 7,8).
When this window is displayed, the assignments can be changed the by using
the 10 keypad in the selected channel of this window “Selected” means
cursor on this window (e.g. at above graphics, Input 6.) Don’t confuse this
with channel selecting. (e.g. at above graphics, Input 01) #1 through #8 is
for Bus Assign, #9 is for Master LR Assign, and #0 is for Surround
Enable/Disable.
When this window is selected, the Console's LED field indicators will display
Routing.
FADER/AUX1 through PAN/SURR/AUX4 are displayed as Bus Assign, Odd Bus
Assignments are Green, Even Bus Assignments are Red, and Both Bus
[GROUP>ROUTING] window