Panasonic RAMSA WR-DA7 - Manual (Page 52)

3 - 1 0
CAUTION: This window should be checked immediately after you upgrade the
console. Because this is a new feature, it is possible for the Input Channels to
be assigned randomly. If they are incorrect, simply press either the MIDI RMT
or the DAW button depending on what is displayed in the window. Once you
press the default button in each section and return to normal operation, it
should display NONE in each space. This is the correct default and your DA7
will recall it You will only need to do this once at the time you upgrade.
The [MIDI>MIDI RMT] window displays ‘DAW MODE’ in the Library’s
[TITLE]. You can not store, edit and recall the parameters of settings stored
in this library.
Operation with ProTools
The following instructions should be confirmed with the user manual for
your ProTools set-up. It is included here as a reference guide only. ProTools
will communicate with the DA7 in the same manner as a JL Cooper CS-10.
Cursor to the desired [DAW] button in the FADER area and press the ENTER
button.
[UTILITY>USER CSTM] window
[MIDI>MIDI RMT] window