Parker Hannifin 192-510011N7 - Manual (Page 29)

Accessories for HLE and HLEZ
Automation
29 Parker Hannifin GmbH
Electromechanical Division
Dimensional drawings of connection points
Type 0320.xx Type 0450.xx Type 0625.xx
St
andar
d
f
ix poi
nt
connect
io
n
3
50 (l
1
)
L
K
35
15 7,5
18
,5
7
6
40
L
K
2
A-1
6
A+
9
16
26
7
A: see dimensions
of cable carrier chain
25
94
11
8 9
1,
5
30
35
55
12,5
10
63
2
L
K
St
andar
d
dr
iver
connect
io
n
3
50 (l
1
)
L
K 7
23
35
15 7,5
40
L
K
6
2
A-
13
A+
9
16
26
7
A: see dimensions
of cable carrier
chain
70
2
9
L
K
25
10
0
1,
5 12
3
12,5
10
30
35
55
Technical data
Type
Self supporting arrangement Self supporting
arrangement with per-
mitted deflection
maximum stroke
[mm]
maximum speed
[m/s]
maximum
acceleration
[m/s 2 ]
maximum
stroke
[mm]
maximum speed
[m/s]
maximum
acceleration
[m/s 2 ]
0.320 2400 10 10 3500 2.5 1
0.450 3000 10 10 4400 2.5 1
0.625 5000 8 10 6000 3 1
Guidelines for using cable carriers
Use only electrical cables which are suitable for use in cable carriers. Hose lines should be highly flexible and should
only extend slightly under pressure. Weight should be distributed across the cable track as evenly as possible. Cables
must not be twisted when routed in the cable carrier and should be routed next to one another and as loosely as possi-
ble.
d
<d
Avoid laying several lines on top of each other and laying lines of different diame-
ters directly next to one another. If multiple layers must be used, separating strips
should be inserted between each layer – should such circumstances arise, please
contact HAUSER.
If there is no alternative to routing several lines beside each other without sub-di-
visions, the clearance height within the carrier must be less than line diameter.
This is the only way of preventing the cables from twisting.
d
1,1 d
d
1,2 d
d
1,1 d
h
1,
1h
electric line hose flat cable The supply cables must be able to move freely in the cable carrier – they must
never be fastened or bundled together.
Separating strips must always be inserted
between flat cables routed in multiple layers.
Recommended dimensions of the space required:
with round cables:
approx. 10% of the line diameter
with flat cables: for each, approx. 10% of the cable width and cable thickness
with hose lines: approx. 20% of the hose diameter