Panasonic KX-FL501C - Manual (Page 49)

49
Receiving Faxes
Pager call - when the unit receives a fax !
This feature allows your unit to call your pager when your unit receives a fax document.
1 Press .
Display:
2 Press , then .
3 Press .
4 Rotate to select
“ON”.
● If this feature is not required, select
“OFF”.
5 Press .
6 Enter your pager number.
● You can enter a total of 46 digits and/or
pauses.
Example:
1 202 555 1234PP12345678PP5555#
7 Press .
● The unit will dial the stored number.
8 Check that your pager received the pager
test call.
9 Press . MONITOR
PAGER TEST
SET
NO.=
SET
MODE=ON
SPEED DIRECTOR
MODE=OFF
SET
FAX PAGER CALL
7 0
SYSTEM SET UP
MENU
MONITOR
(Pause)
REDIAL/PAUSE
MENU Display
SET SPEED DIRECTOR
5555
Pager
Your pager will display the message you
entered in step 6. (For example: 5555)
When your pager receives a pager call
Note:
● If you have subscribed to a Call Display
service, your pager will display the caller’s
telephone number instead of the message.
Your pager
number
Pauses
Your pager access
code, if required.
Message you want displayed
on your pager when your
unit receives a fax.