Panasonic KX-FL501C - Manual (Page 58)

Features Summary
58
You can confirm the status of the
other party’s machine.
● If the ring back tone continues, the
other party’s machine may not be a
facsimile or may have run out of
paper. Check with the other party.
● The connecting tone volume
cannot be adjusted.
#76
If you often have trouble when
sending a fax, this feature allows
you to hear connecting tones: fax
tone, ring back tone and busy tone.
CONNECTING TONE
ON
OFF
Code Display & Feature Settings How the unit operates
(The default setting is in bold type.)
See page 49 for details.
#70 If you have a pager and wish to
know when your unit receives a
fax, activate this feature.
FAX PAGER CALL ON
OFF
#68
ECM stands for Error Correction
Mode. To send a fax even if there
is static interference on the
telephone line.
ECM SELECTION
ON
OFF
This feature is available when the
transmitting/receiving stations are
ECM compatible.
● If documents are in memory, clear
them before making the setting
(p. 42).
Advanced features (cont.) !
How to set menu options
Programming table (cont.)
Note:
● Step 4 may be slightly different depending on the
feature.
● See page 52 for more details.
1. Press .
2. Rotate until the
following is displayed.
Display:
Press and rotate
until the desired
feature is displayed.
3. Press . SET
SPEED DIRECTOR
SET
ADVANCED MODE
SPEED DIRECTOR
MENU 4. Rotate until the
desired setting is displayed.
5. Press .
6. Press . MENU
SET
SPEED DIRECTOR
#49
To answer a call with an extension
telephone in TEL/FAX mode
(p. 47).
AUTO DISCONNECT
ON /
CODE=
0
OFF
1. Follow steps 1–3 above.
2. Rotate to
select “ON”.
3. Press .
4. Enter your code from 2 to 4 digits,
using 0–9 and .
5. Press .
6. Press .
MENU
SET
SET
SPEED DIRECTOR