Panasonic KX-FL501C - Manual (Page 52)

Features Summary
52
The unit provides various programming features. Program the desired settings by referring to the
programming tables (p. 53–59).
1 Press .
Display:
2 Select the feature you wish to program.
■ For basic features (p. 53, 54):
Rotate until the
desired feature is displayed.
■ For advanced features (p. 55–59):
Rotate until the
following is displayed.
Press and rotate
until the desired
feature is displayed.
3 Press .
● The current setting of the feature will be
displayed.
4 Rotate until the
desired setting is displayed.
● This step may be slightly different
depending on the feature.
5 Press .
● The setting you selected is set, and the
next feature will be displayed.
6 To exit programming, press . MENU
SET
SPEED DIRECTOR
SET
SPEED DIRECTOR
SET
ADVANCED MODE
SPEED DIRECTOR
SPEED DIRECTOR
SYSTEM SET UP
MENU
Programming by entering the program
code number directly
You can select a feature by directly entering the
program code (# and 2-digit number) instead of
using .
1. Press .
2. Press and the 2-digit code number.
3. Follow steps 3 to 6 above.
● See programming tables for code numbers
(p. 53– 59).
MENU
SPEED DIRECTOR
Programming !
SET
MENU Display
SPEED DIRECTOR
General programming method
To cancel programming
Press to exit the program. MENU