Panasonic KX-FL501C - Manual (Page 55)

Features Summary
55
How to set menu options
Programming table
Code
#22
To print the journal report
automatically for fax communications.
AUTO JOURNAL
ON
OFF
“NEXT FAX”: This setting is effective
only for the next attempted fax
transmission. After transmission, the
unit will return to the previous setting.
“ERROR”: When the previous fax
transmission fails and you redial
the same number.
● This feature is not available for
broadcast transmission.
● The calling charge may be higher.
#23
If you have difficulty sending an
overseas fax, activate this feature
before starting transmission. This
feature makes sending documents
easier as the transmission speed is
slowed down.
OVERSEAS MODE
Display & Feature Settings How the unit operates
#25
To send a fax automatically at a
specified time.
This allows you to take advantage
of low-cost calling hours offered by
your telephone company.
● The setting can be reserved to
take place up to 24 hours in
advance.
DELAYED SEND
NEXT FAX
ERROR
OFF
ON /
fax no. /
hh:mm
OFF
(The default setting is in bold type.)
Advanced features !
“ON”: The unit will print the journal
report automatically after every 30
new fax communications (p. 35).
Note:
● Step 4 may be slightly different depending on the
feature.
● See page 52 for more details.
1. Press .
2. Rotate until the
following is displayed.
Display:
Press and rotate
until the desired
feature is displayed.
3. Press . SET
SET
ADVANCED MODE
SPEED DIRECTOR
MENU 4. Rotate until the
desired setting is displayed.
5. Press .
6. Press . MENU
SET
SPEED DIRECTOR
SPEED DIRECTOR
To send a document:
1. Insert the document.
2. Follow steps 1–3 above.
3. Rotate to
select “ON”.
4. Press .
5. Enter the fax number.
6. Press .
7. Enter the transmission start time.
Press to select “AM” or “PM”.
8. Press .
9. Press .
● To cancel after programming,
press then
. SET STOP
MENU
SET
SET
SET
SPEED DIRECTOR