Planet Technology ADSL 2/2+ Router with USB Port ADE-3410v2 - Manual (Page 34)

Click “Next”. In this interface, you can modify the WAN IP, Default Gateway and DNS
Server settings.
WAN IP Address: Input the IP address of the WAN interface provided by your
ISP.
WAN Subnet Mask: Input the subnet mask concerned to the IP address of the
WAN interface provided by your ISP.
Obtain Default Gateway automatically: To obtain the IP address of the default
gateway assigned by the uplink equipment such as BAS.
Use the following Default Gateway: If you want to input the IP address of the
default gateway by yourself, click this entry and then input related data in the
fields.
Otherwise to obtain the IP address of the default gateway assigned by the uplink
equipment such as BAS.
Use IP Address: Input the gateway of the WAN interface provided by your ISP.
Use WAN Interface: As to BAS equipment, it is the IP address of the downlink
interface.
Obtain DNS server address automatically: To obtain the IP address of the
DNS server assigned by the uplink equipment such as BAS.
Use the following DNS server address: If you want to input the IP address of
the DNS server by yourself, click this entry and then input related data in the
fields.
Primary DNS server: Input the IP address of the primary DNS server here.
Secondary DNS server: Input the IP address of the secondary DNS server
provided by your ISP here.
After correctly modifications, click “Next” to show the following interface.
In this interface, you can modify the Service name and enable/disable the NAT, Firewall,
34