Planet Technology ADSL 2/2+ Router with USB Port ADE-3410v2 - Manual (Page 44)

Click “ENABLE Automatic Assigned Default Gateway” box to show the interface.
3.5.5.2 Routing – Static Route
In this interface, you can modify the Static Route settings.
Click “Static Route” to pop up an interface as shown in Fig. 3.5-47. In this interface, you
can query the preset static routes, delete an existing static route, or add a new static route.
By default, the system has no static route information.
Destination: The IP address where packets will go to.
Netmask: The subnet mask of the destination IP address.
Gateway: The gateway that the packets will pass by during transmission.
Interface: The interface that the packets pass through on the ROUTER.
Click “Add” to show the following interface.
44