Planet Technology ADSL 2/2+ Router with USB Port ADE-3410v2 - Manual (Page 36)

Click “Next”. In this interface, you can modify the Service name.
WAN Service: Please enable it, unless you don’t need to active the PVC.
Click “Next”. In this interface, it shows the all configuration.
Click “Save” to save these settings. And you can click “Back” to make any
modifications.
NOTE: You need to reboot to activate this WAN interface and further configure services
over this interface.
3.5.2 LAN
In this interface, you can modify and configure “IP Address” and “DHCP Server”.
If bridge mode only, the interface as below:
36