Planet Technology ADSL 2/2+ Router with USB Port ADE-3410v2 - Manual (Page 9)

Rear panel Port and Button Definition
Port Meaning
1
Power
Switch
Power ON/OFF switch
2 Power Connect the supplied power adapter to this jack (10 DC, 1A).
3 Reset
After the device is powered on, press it to reset the device or restore
to factory default settings. Reset the device 6 seconds above to
restore the factory default settings (this is used when you can not
login to the router, e.g. forgot the password)
4 Ethernet
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four
LAN ports when connecting to a PC or an office/home network of
10Mbps or 100Mbps.
5 USB
Connect the supplied USB cable to this port when connecting to the
PC
6 Line
Connect the supplied RJ-11 (“telephone”) cable to this port when
connecting to the ADSL/telephone network.
2. Installation
This chapter offers information about installing your router. If you are not familiar with
the hardware or software parameters presented here, please consult your service provider
for the values needed.
2.1 System Requirement
1. Personal computer (PC)
2. Pentium II 233 MHz processor minimum
9