Precor CLIMBER 835 - Manual (Page 15)

Chapter
1
Assembling the Climber
Thank you for choosing Precor. For proper installation, please
read this guide thoroughly and follow the assembly
instructions. If you do not assemble the climber according to
these guidelines, you could void the Precor Limited Warranty.
Unpacking the Equipment
Ask for help from two or more people to unpack and
assemble the climber.
Preparing for Installation
DANGER
Do not attempt to connect electrical power until all
assembly procedures are complete and the console
is properly installed.
Follow these installation requirements when assembling the
unit:
 Assemble the unit near the location where you plan to use
it.
 Provide ample space around the unit. Open space around
the unit allows for easier access.
 Set up the unit on a solid, flat surface. A smooth, flat
surface under the unit helps keep it level. A level unit has
fewer malfunctions.
 Open the box and assemble the components in the
sequence presented in this guide.
 Insert all fasteners with your fingers. Use your fingers to
properly align and thread the fasteners. This helps
alleviate cross-threading. Do not fully wrench tighten
fasteners until instructed to do so.