Making sure the unit is stable – Precor CLIMBER 835 User Manual

Page 24

Advertising
background image

22

Assembling and Maintaining the 835 Climber

8.

Clean the foot steps, plastic covers and upright support

with a soft cloth or wipe moistened with an appropriate

cleaning solution. For more information about which

cleaners to use, refer to Daily Cleaning.

9.

Level the climber as described in the section Making Sure

the Unit Is Stable.
Important: Do not allow anyone to use the climber until it has

been leveled and made stable.

Making Sure the Unit Is Stable

Make sure the unit is level before allowing anyone to use it.

CAUTION: To eliminate movement, make sure the adjustable feet
are in contact with the floor.

To level the unit:
1.

Gently rock the unit. If there is any movement, ask your

assistant to tip the unit to one side while you locate the

adjustable feet.

2.

Correct the height of each adjustable foot as follows.

If you want to … Then turn the adjustable feet …

Raise the unit Counterclockwise

Lower the unit Clockwise

Important: Place the unit on a flat surface. Rotating the

adjustable feet cannot compensate for extremely uneven surfaces.
When you are finished adjusting the unit, place the unit on the

floor and recheck that it is level.

Advertising