Precor CLIMBER 835 - Manual (Page 31)

Maintenance
29
Moving the Equipment
The equipment is very heavy. If you plan to move it to a new
location, obtain the help of an adult assistant and use proper
lifting techniques. If the equipment includes roller wheels on
one end, use the wheels to reduce the load on yourself and
your assistant.
To move the climber:
1.
Disconnect, unplug, and remove all external connections
(television, Ethernet, and power).
2. Grasp the climber by its upright support and tip it forward
onto its roller wheels.
3. Push the climber into its new location.
4. Lower the rear foot supports to the floor.
5. Push the climber back and forth to verify that it sits flat on
the floor. If it rocks at all, or if it does not appear to be
level, correct it by adjusting its rear feet.
Long-Term Storage
If you do not expect anyone to use the equipment for a long
time, perform the following tasks to prepare it for storage:
 If it has a power cord, disconnect the cord.
 If it has an optional power adapter, connect the adapter to
prevent damage to the internal battery.
 Position it so that it will not become damaged and will not
interfere with people or other equipment.