Polycom QSX 3725-22370-001/B - Manual (Page 27)

Logging On to the QSX Administrative Web Page
After the QSX system is set up, you can log on to the system’s Admin Web Page by
following these steps:
1. On a computer, open Windows Internet Explorer version 6.0 or later.
2. In the browser address line, enter the IP address of the QSX system followed by
/admin.htm, for example xxx.xx.xx.xx/admin.htm where xxx.xx.xx.xx is the My
IP shown on the Info screen (e.g.- http://172.43.156.34/admin.htm).
3. Enter the administrator’s user name and password.
4. The default administrator’s user name is admin. The password is blank until you
establish one.
27