Polycom QSX 3725-22370-001/B - Manual (Page 38)

LAN Properties
To configure LAN properties:
1. Log on to the QSX Admin Web as described on Page 23 .
2. Go to Admin Settings > LAN Properties.
3. Configure these settings:
Setting Description
Host Name
(default: serial number) Indicates the system’s DNS name. If you change the
Host Name, the system restarts.
IP Address
(default: Obtain IP address automatically) Specifies how the system obtains an IP address.
• Obtain IP address automatically — Select if the
system gets an IP address from the DHCP server on
the LAN.
• Enter IP address manually — Select if the IP
address will not be assigned automatically.
Your IP Address is
or
Use the Following IP Address Displays the IP address currently assigned to the
system if the system obtains its IP address
automatically.
Allows you to enter the IP address for the system if
Enter IP address manually is selected.
DNS Servers Displays the DNS servers currently assigned to the
system. If the system does not automatically obtain
a DNS server address, enter up to four DNS servers
here.
Default Gateway Displays the gateway currently assigned to the
system. If the system does not automatically obtain
a gateway IP address, enter one here.
Subnet Mask Displays the subnet mask currently assigned to the
system. If the system does not automatically obtain
a subnet mask, enter one here.
WINS Server Displays the WINS server currently assigned to the
system. If the system does not automatically obtain
a WINS server IP address, enter one here.
WINS Resolution
(default: disabled) Sends a request to the WINS server for WINS name
resolution.
LAN Speed
(default: Auto) Specifies the LAN speed to use. Note that the speed
you choose must be supported by the switch.
Choose Auto to have the network switch negotiate
the speed automatically. If you choose 10 Mbps or
100 Mbps, you must also select a duplex mode.
Duplex Mode
(default: Auto) Choose Auto to have the network switch negotiate
the Duplex mode automatically, or specify the
Duplex mode to use. Note that the Duplex mode you
choose must be supported by the switch.
38