Polycom QSX 3725-22370-001/B - Manual (Page 33)

Settings Description
Baud Rate Fixed at 115200.
RS-232 Mode
(default: Debug) Control or Debug
RS-232 Flow Control Fixed at None.
Bandwidth
One of the primary variables that can affect the quality of a QSX-based content sharing
session is bandwidth. Different participants may be connected at different speeds.
Alternately, the total available bandwidth may not be sufficient for all participants to use
the maximum transmit and receive rates. As a result, QSX 2.0 provides a number of
enhancements for how bandwidth can be used.
To configure the Bandwidth settings described below, follow these steps:
1. Log on to the QSX Admin Web as described on Page 23 .
2. Go to Admin Settings > Table of Contents > General Settings > Bandwidth
3. Configure the settings.
4. Click on the Update button.
Settings Description
Web Viewer Bandwidth Usage
(default: Bandwidth Sharing ) Specifies how you want to allocate bandwidth for web
viewers. There are two options:
Bandwidth Sharing - For use in normal corporate LAN
environments.
Time Sharing - For use in which web viewers are
accessing the QSX session from a low-bandwidth
connection.
For more details on bandwidth, please see Appendix A.
Maximum Average Transmit Bandwidth
(default:1920 Kbps) Specifies the maximum amount of bandwidth that you
wish to use when transmitting content from the QSX to
other meeting participants.
Maximum Average Receive Bandwidth
(default:1920 Kbps) Specifies the maximum amount of bandwidth that you
wish to use when receiving content from another QSX
unit.
33