4 selecting the operation mode (scan/copy/fax), Document requirements, 5 setting the original – Panasonic DP-MB350 User Manual
Page 19: Selecting the operation mode (scan/copy/fax), Setting the original, 4 selecting the operation mode (scan/copy/fax), 5 setting the original, Preparation 19, 1 using the scanner glass 1
2. Preparation
19
For assistance, please contact an authorized Panasonic dealer.
2.4 Selecting the operation mode
(Scan/Copy/Fax)
You can select the desired mode by pressing one of the
following buttons.
–
{
Scan
}
: Select this mode when using the unit as a
–
{
Copy
}
: Select this mode when using the unit as a
–
{
Fax
}
: Select this mode when using the unit as a fax
machine (page 42).
Note:
L
The default operation mode is the copy mode.
L
You can change the default operation mode (feature
#463 on page 60) and the timer before returning to
the default operation mode (feature #464 on page
60).
Document Requirements
2.5 Setting the original
2.5.1 Using the scanner glass
1
Open the document cover (
1
).
2
Place the document FACE DOWN on the scanner
glass (
2
), aligning the top left of the document with
the corner where the
m
mark is positioned.
3
Close the document cover.
Note:
L
Confirm that there are no documents in the
automatic document feeder.
L
Place the original onto the scanner glass gently. To
avoid malfunction, do not press down too firmly.
L
If the original is a thick book, do not close the
document cover.
L
Confirm that any ink, paste or correction fluid has
dried completely.
L
Effective scanning area is shown by the shaded
area:
Effective scanning area
2
1
208 mm
(8
3
/
16
"
)
348 mm
(13
11
/
16
"
)
4 mm
(
5
/
32
"
)
4 mm
(
5
/
32
"
)
4 mm
(
5
/
32
"
)
4 mm
(
5
/
32
"
)