Volume, 6 adjusting the volume, Initial programming – Panasonic DP-MB350 User Manual
Page 21: 7 date and time, Adjusting the volume, Date and time, 6 adjusting the volume, 7 date and time, Preparation 21
2. Preparation
21
For assistance, please contact an authorized Panasonic dealer.
Volume
2.6 Adjusting the volume
Important:
L
Before adjusting the volume, set the operation
mode to fax mode. If the
{
Fax
}
light is OFF, turn it
ON by pressing
{
Fax
}
.
Ringer volume
1. Press
{V}
or
{^}
repeatedly to select “
Ringer
Volume
”.
2. Press
{<}
or
{>}
.
To turn the ringer OFF
1. Press
{V}
or
{^}
repeatedly to select “
Ringer
Volume
”.
2. Press
{<}
repeatedly to display “
Ringer Off
” in
the status bar.
L
The unit will not ring.
L
To turn the ringer back ON, press
{>}
.
Monitor volume
1. While using the monitor, press
{V}
or
{^}
repeatedly to select “
Monitor Volume
”.
2. Press
{<}
or
{>}
.
Initial Programming
2.7 Date and time
We recommend you to set the date and time. The other
party will receive your unit’s date and time as the header
information.
1
{
Menu
}
i
{#}{
1
}{
0
}{
1
}
i
{
Set
}
2
Enter the current month/date/year/hour/minute.
Example: August 10, 2009 10:15 PM (12 hour
clock format)
1. Press
{V}
or
{^}
repeatedly to select “
Date
”.
i
{<}
/
{>}
2. Press
{
0
}{
8
}
{
1
}{
0
}
{
2
}{
0
}{
0
}{
9
}
.
M:08/D:10/Y:2009
3.
{
Set
}
4. Press
{V}
or
{^}
repeatedly to select “
Time
”.
i
{<}
/
{>}
5. Press
{
1
}{
0
}
{
1
}{
5
}
, then press
{V}
or
{^}
repeatedly to select “
PM
”.
10:15PM
6.
{
Set
}
3
Press
{
Menu
}
to exit.
Note:
L
Your unit’s date and time will be used as the header
information for the following:
–
When sending as an attached file to an email
destination directly from this unit (Scan to email
address) (page 32).
–
When sending faxes (page 42).
L
If the date and time is not set correctly, the other
party will receive an incorrect date and time as their
header. This may confuse the other party.
To correct a mistake
Press
{<}
or
{>}
to move the cursor to the incorrect
number, and make the correction.
If you have subscribed to a Caller ID service
The date and time will be automatically set according to
the received caller information.
L
If the time has not previously been set, Caller ID will
not adjust the clock.
{
Fax
}
{
V}{^}{<}{>}
{
Set
} {
V}{^}{<}{>}
{
Menu
}