Programmable features, Features summary, 1 programming – Panasonic DP-MB350 User Manual
Page 57: Programming, 1 programming, Programmable features 57
9. Programmable Features
57
9 Programmable Features
Features Summary
9.1 Programming
1
{
Menu
}
2
Press
{#}
and the 3-digit code (page 58 to page
74).
3
Press the appropriate selection to display the
desired setting.
L
This step will vary depending on the feature.
4
{
Set
}
5
Press
{
Menu
}
to exit.
To select features through the web browser interface
(LAN connection only)
You can change features through the web browser
interface instead of the unit.
1. Start Multi-Function Station.
i
[
Utilities
]
i
[
Configuration Web Page
]
L
You can also access the unit by entering its IP
address on the web browser.
2. Select the desired category from the menu bar.
[
Device Configuration
]
: features of the unit
[
Advance Configuration
]
: advanced features for
each mode
[
Network Configuration
]
: network features
3. Type “root” as the user name, then enter the
password (feature #155 on page 58).
i
[
OK
]
4. Select the desired feature tab at the top of the right
frame.
5. Change the settings or edit the information.
L
This step will vary depending on the feature.
6.
[
Submit
]
L
The new setting will be transferred to the unit.
7. Close the web browser.
Note:
L
The settings displayed in the web browser will be
updated by clicking
[
Reload
]
.
{
Set
}
{
Menu
}