4 copy features, Copy features, 4 copy features – Panasonic DP-MB350 User Manual
Page 67: Programmable features 67
9. Programmable Features
67
9.4 Copy features
Feature/Code
Selection
Setting the paper input tray to
use for copy
{#}{
4
}{
6
}{
0
}
This feature will be displayed only when the lower input tray is installed (page
79).
{
1
}
“
#1
” (default): Standard input tray
{
2
}
“
#2
”: Lower input tray
{
3
}
“
#1+#2
”
Note:
L
To select “
#2
”, select “
Plain Paper
” or “
Thin Paper
” for the recording
paper type setting (feature #383 on page 60).
L
To select “
#1+#2
”,
–
select the same paper size for the standard input tray (feature #380 on
page 59) and lower input tray (feature #382 on page 59). If either is
changed, “
#1
” will be selected automatically.
–
select “
Plain Paper
” or “
Thin Paper
” for the recording paper type
setting (feature #383 on page 60).
L
If the copy input tray prompt (feature #471 on page 68) is activated, it
overrides this feature.
Changing the default copy
resolution
{#}{
4
}{
6
}{
1
}
To change the default resolution setting for copying.
{
1
}
“
Text/Photo
” (default): For documents containing both text and
photographs.
{
2
}
“
Text
”: For documents containing only text.
{
3
}
“
Photo
”: For documents containing photographs, shaded drawings, etc.
Holding the previous page
layout setting
{#}{
4
}{
6
}{
7
}
{
0
}
“
Disabled
” (default): Deactivates this feature.
{
1
}
“
Enabled
”: The unit will hold the previous setting.
Holding the previous zoom
setting
{#}{
4
}{
6
}{
8
}
{
0
}
“
Disabled
” (default): Deactivates this feature.
{
1
}
“
Enabled
”: The unit will hold the previous setting.
Holding the previous collate
setting
{#}{
4
}{
6
}{
9
}
{
0
}
“
Disabled
” (default): Deactivates this feature.
{
1
}
“
Enabled
”: The unit will hold the previous setting.
Holding the previous duplex
setting
{#}{
4
}{
7
}{
0
}
{
0
}
“
Disabled
” (default): Deactivates this feature.
{
1
}
“
Enabled
”: The unit will hold the previous setting.
Note:
L
When this feature is activated, it will be effective for the following:
–
When making 1-sided originals into 2-sided copies (page 38).
–
When making 2-sided originals into 2-sided copies (page 39).
L
Even if this feature is activated, it will not be effective when making 2-sided
originals into 1-sided copies (page 39).
L
When making 2-sided originals into 2-sided copies, the original document
settings will be reset even if this feature is activated. See step 2 to 4 on page
39 to change the setting again.