Help, Reports and displays, 1 report messages – Panasonic DP-MB350 User Manual

Page 81: Report messages, 1 report messages, Help 81

Advertising
background image

11. Help

81

For assistance, please contact an authorized Panasonic dealer.

11 Help

Reports and Displays

11.1 Report messages

To indicate the unit’s fax transmission/reception status, one of the following messages will be printed on the
confirmation and journal reports (page 42).

Message

Code

Cause & Solution

Communication Error

40-42
46-72

FF

L

A transmission or reception error occurred. Try
again or check with the other party.

43
44

L

A line problem occurred. Connect the telephone line
cord to a different jack and try again.

L

An overseas transmission error occurred. Try using
the overseas mode (feature #411 on page 62).

Document Jammed

-----

L

Remove the jammed document (page 100).

Error-Not Your Unit

53
54
59
70

L

A transmission or reception error occurred because
of a problem with the other party’s fax machine.
Check with the other party.

Junk Fax Proh. Reject

-----

L

The junk fax prohibitor feature of this unit rejected
fax reception.

Memory Full

-----

L

The memory is full of received documents due to a
lack of recording paper or a recording paper jam.
Load paper (page 14) or remove the jammed paper
(page 94).

L

If the PC fax setting (feature #442 on page 65) is set
to

Always

, check the connection between the

computer and the unit.

L

If the fax preview mode (feature #448 on page 52) is
set to

On

, view, print or save the documents, and

then erase unnecessary documents (page 49, 53).

No Document / Failed Pickup

-----

L

The document was not fed into the unit properly. Re-
insert it and try again.

Other Fax not responding

-----

L

The other party’s fax machine is busy or has run out
of recording paper. Try again.

L

The other party’s fax machine rings too many times.
Send the fax manually (page 42).

L

The other party’s machine is not a fax machine.
Check with the other party.

L

The number you dialed is not in service.

Pressed the ‘Stop’ key

-----

L {

Stop

}

was pressed and fax communication was

canceled.

The cover was opened

-----

L

The left cover was opened. Close it and try again.

OK

-----

L

Fax transmission or reception was successful.

Advertising