Taking pictures using the built-in flash – Panasonic DMC-FZ10PP User Manual

Page 38

Advertising
background image

Recording pictures (basic)

38

Taking Pictures using the Built-in Flash

Preparation
• Set the mode dial except for [

]/[

]. (P30)

ª To open the flash

Press the [

OPEN] button.

ª To close the flash

Press the flash until it clicks.

• Be sure to close the flash when not in

use.

ª Switching the flash setting

: AUTO

The flash is automatically activated
according to the recording condition.

: AUTO/Red-eye reduction

The flash is automatically activated
according to the recording condition.
It reduces the red-eye phenomenon
(eyes of the subject appear red in
photo flash) by lighting the flash
before the actual recording of the
picture.
Use this when you take pictures of
people in low lighting conditions.

: Forced ON

The flash is activated every time a
picture is recorded forcibly.
Use this when your subject is back-lit
or under fluorescent light.

: Slow sync./Red-eye reduction

When you take a picture with a dark
background landscape, it makes the
shutter speed slow when the flash is
activated, so that the dark
background landscape will become
bright. Simultaneously it reduces the
red-eye phenomenon.
Use this when taking pictures of
people with the dark background.

: Forced OFF

When you do not open the flash, this
mode is set. Even in dark places, the
flash is not activated.
Use this when taking pictures in
places where use of the flash is not
allowed.

OPEN

SET

WB

REVIEW

FZ10-PP.book 38 ページ 2003年11月18日 火曜日 午後1時7分

Advertising