Panasonic DMC-FZ10PP - Manual (Page 74)

Recording pictures (advanced)
74
Setting ISO Sensitivity
The ISO setting sets the cameras sensitivity to light. The ISO setting can be
increased when you need to take pictures in places where a flash may not be
allowed. The overall picture quality will decrease slightly as the ISO setting is
increased.
Preparation
• Set the mode dial except for [
]. (P30)
1 Select [SENSITIVITY] and set the
ISO sensitivity.
• When setting to [AUTO], the ISO
sensitivity is automatically adjusted
from ISO50 to ISO200 according to
the brightness. (From ISO50 to
ISO400 when using the flash)
• Close the menu by pressing the
[MENU] button after finishing the
setting.
¬Suggestions/Tips ¬
• In Motion image mode [ ], ISO
sensitivity is fixed to [AUTO].
• To avoid noises, we recommend
decreasing the ISO sensitivity or
setting each item on [PICT.ADJ.] to
[LOW]. (P79)
• In A/S/M mode [ ], the ISO
sensitivity cannot be set to [AUTO].
ISO sensitivity 50 400
Use in bright places
(E.g. outdoors)
Suitable Not suitable
Use in dark places Not suitable Suitable
Shutter speed Slow Fast
Noises Less Increase
MENU
SET
WB
REVIEW
SET
WB
REVIEW
REC 2 / 4 SETUP
AUDIO REC.
SENSITIVITY
CONT.AF
D.ZOOM
OFF
AUTO 100 200 400 50
C AF OFF
OFF
EXIT SET SELECT MENU
FZ10-PP.book 74 ページ ２００３年１１月１８日 火曜日 午後１時７分