Panasonic DMC-FZ10PP - Manual (Page 52)

Recording pictures (advanced)
52
Taking Pictures with Aperture-priority AE
When you want the background to be in sharp focus, set the aperture value to a
higher number. The higher the aperture value, the smaller the aperture opening will
be. For a soft focus background, set the aperture number to a lower number which
corresponds to a larger aperture opening.
Preparation
• Set the mode dial to [
]. (P30)
1 Select [AE MODE] and set it to [A].
• Close the menu by pressing the
[MENU] button after finishing the
setting.
2 Set the aperture value and take
the picture.
¬Suggestions/Tips ¬
• Refer to P56 for the available range of
the aperture value and the shutter
speed.
• The focus range is 0.16 feet (5 cm) – ¶
(Wide) and 6.56 feet (2 m) – ¶ (Tele).
• If the subject is too bright, set to larger
aperture value, if too dim, set to
smaller aperture value.
• The brightness of the screen may
differ from that of the actual pictures.
Check it using review function or
setting to the playback mode.
• The ISO sensitivity cannot be set to
[AUTO].
• When the exposure is not adequate, of
the aperture and the shutter speed
values on the screen turn red.
MENU
SET
WB
REVIEW
SET
WB
REVIEW
PICT.SIZE
QUALITY 2304
REC 1 / 4 SETUP
A M
AE MODE
W.BALANCE AUTO
S
AE
EXIT SET SELECT MENU
2304
19 1
A ISO100
SET
WB
REVIEW
EXPOSURE
F2.8
FZ10-PP.book 52 ページ ２００３年１１月１８日 火曜日 午後１時７分