Setting the white balance manually (white set) – Panasonic DMC-FZ10PP User Manual
Page 69
Recording pictures (advanced)
69
Setting the White Balance manually (White set)
Preparation
• Set the mode dial except for [
]/[
]. (P30)
1
Select [W.BALANCE] and set to
[
].
2
(Only when setting the white
balance again) Press
1.
3
Aim the camera at a sheet of white
paper
1 or similar object so that it
completely fills the frame to white
on the screen and press the
shutter button fully.
• Close the menu by pressing the
[MENU] button after finishing the
setting.
¬Suggestions/Tips ¬
• When setting the white balance to the
mode except for [AUTO], you can
finely adjust the white balance. (P70)
• The setting of the white balance is
applied to the other recording modes.
• In Motion image mode [
], the white
balance is fixed to [AUTO].
• When taking a picture with the flash,
the white balance will be automatically
adjusted [except for [
] (Daylight)
and [
] (Flash)], but the white
balance may not be properly adjusted
when the photo flash is insufficient.
MENU
SET
WB
REVIEW
SET
WB
REVIEW
REC
1
/
4
SETUP
PICT.SIZE
QUALITY
SPOT MODE
2304
OFF
W.BALANCE
EXIT
SET
SELECT
MENU
WB
WB
FZ10-PP.book 69 ページ ２００３年１１月１８日 火曜日 午後１時７分