Panasonic TC 22LR30 - Manual (Page 21)

21
TV Operation
Top view
Initial Setup (Ready to Play)
After plugging the unit into your household AC outlet and pressing
POWER to turn the unit on for the first time, the unit assists you
to set the on-screen language, and automatically tunes in all the
channels it can receive and sets the clock.
The unit automatically determines the type of transmission
(airwaves or cable) and puts them into channels as follows.
Preparation
• Turn on the television and select the appropriate video input to suit the
connections to this unit.
• Confirm that the antenna is connected correctly.
1
Press POWER.
• For remote POWER button
to function, unit POWER
must be ON.
2
Press ▲▼ to select
the language and
press ENTER.
• The unit then proceeds with Auto Clock Setting. The time is
displayed when finished.
• If “No Channels found...” is displayed, press ENTER again.
• DST, Daylight Saving Time, shows the summertime setting.
• TIME ZONE shows the time difference from Greenwich meantime
(GMT).
EST (Eastern Standard Time) = GMT –5
CST (Central Standard Time)
= GMT –6
MST (Mountain Standard Time) = GMT –7
PST (Pacific Standard Time)
= GMT –8
AST (Alaska Standard Time) = GMT –9
HST (Hawaii Standard Time) = GMT –10
For other areas: xx hr
5
Press ENTER.
If the clock is an hour slower or faster than the
actual time
Select “–1” or “+1” in “Time Zone Adjust” in the SETUP menu.
(p. 23)
If the unit couldn’t set the clock automatically
Set the time manually. (Refer to “Manual Clock Setting” on page
23.)
To start Auto Channel Setting again (after
relocation, for example)
Reset the unit. (Refer to “Reset all unit Memory Functions” on
page 24.)
Antenna system and VCR Plus+ guide channel settings all
revert to the default values.
Band Channel
TV Mode
(Airwaves) VHF 2-13
UHF 14-69
CATV Mode
(Cable)
VHF 2-13
CATV LOW BAND 95-99
CATV MID/SUPER BAND 14-36
CATV HYPER BAND 37-65
ULTRA BAND
66-94
100-125
SPECIAL CATV CHANNEL 1
English
Espa ñol
Fran çais
Select Language
Seleccione la Lengua
S élection de Langue
Press ENTER
Pulse ENTER
Appuyer sur ENTER
4
Press ENTER to start
Auto Channel Setting.
A U T O C H S E T T I N G
I n “ A U T O C H S E T T I N G ”
C H A N N E L 3 5
MENU
STOP
Auto Clock Setting
4/4/2004 12:15 AM
DST---------------ON
TIME ZONE----EST
Auto Clock Setting is complete.
POWER
CH ▲▼
ENTER
▲▼
POWER
Initial Setup –Ready to Play–
3
Press ENTER. Auto Channel Setting
Please press the ENTER key.
Connect antenna cable and if you use a
cable box tune it to your local PBS CH
then...