Panasonic TC 22LR30 - Manual (Page 41)

41
Disc / Card Operation 1:58 SP Remaining Recording Time
3/29 MON 12:53 PM
TIMER
RECORDING
MODE OFF ON CHANNEL DATE
64
New Timer Program
5:10 PM 4:20 PM SP
CHECK
OK
NO
01 3/29 MON
64 8:00 PM 7:00 PM SP OK 02 4/5 MON
Notes:
• “ ” flashes when the unit cannot go to timer recording standby (e.g., a
recordable disc is not in the disc tray). Check the disc carefully.
• The actual time recorded may be longer than the program itself when
television programs are recorded using VCR Plus+ system.
• When you program successive timer recordings to start immediately
one after the other, the unit cannot record the part at the beginning of
the later programs (a few seconds when recording with DVD-RAM and
approximately 30 seconds when recording with DVD-R).
• If you DST (Daylight Saving Time) to On when manually setting the clock
(p. 23), timer recording may not work when summer switches to winter and
vice versa.
• When the unit is carrying out a timer recording:
- You may utilize playback.
• When the disc is not inserted, the disc is full or a non-recordable disc
is inserted, the warning message appears because Timer Recording is
disabled.
• During Timer Recording, dubbing and editing are disabled.
• Timer recordings are automatically placed in order of DATE → ON (Start
Time).
• If timer recording times overlap, the program with the earliest start time
is recorded first. The overlapped portion of the later program will not be
recorded.
• Press and hold ▲▼ to alter the Start (Start time) and Stop (Finish
time) in 30-minute increments.
• You can also set CHANNEL (Program Position/TV Station Name),
DATE (See below), ON (Start time), and OFF (Finish time) with the
NUMBER keys.
• You can also press REC MODE to change the recording mode.
• Date
Date
Daily timer
Weekly timer
Current date up to one month later
minus on day
SUN-SAT→MON-SAT→MON-FRI
WEEKLY SUN→---→WEEKLY SAT
4
Press ENTER.
3
Press ► to move through the items and change the
items with ▲▼.
Check to make sure “OK”
is displayed.
5
Press RETURN.
• “ ” lights on the Front Display to indicate timer recording standby
has been activated.
To cancel recording when recording has already
begun
Hold down STOP for a few seconds.
• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by
the unit or the disc.
1:58 SP Remaining Recording Time
3/29 MON 12:53 PM
TIMER
RECORDING
MODE OFF ON CHANNEL DATE
8:00 PM 7:00 PM 4/5 MON 64
Enter Name
SP
• Repeat steps 2~4 to program other recordings.
• Enter Name:
Press ◄► to select “Enter Name” and press ENTER. (p. 63)
1:58 SP Remaining Recording Time
3/29 MON 12:53 PM
TIMER
RECORDING
MODE OFF ON CHANNEL DATE
New Timer Program
CHECK NO
Press ENTER or VCR Plus+ to
store new program.
Check, change or delete a program
1
Press PROG/CHECK.
To change a program
Press ▲▼ to select the program and press ENTER.
Press ◄► to move through the items and change the items with
▲▼, then press ENTER.
To delete a program
Press ▲▼ to select the program and press CANCEL.
• You cannot delete programs that are currently recording.
To put the unit on timer recording standby
Press RETURN.
• “ ” lights on the Front Display to indicate timer recording
standby has been activated.
Notes:
• Programs that failed to record are displayed gray. They are automatically
deleted from the timer recording list at 4 a.m. two days later.
• During timer recording, you can change the end time as long as the
recording mode is not “FR”.
Icons
This program is currently recording.
The times overlap those in another program. Recording of the
program with the later start time starts when the earlier program
finishes recording.
You stopped a weekly or daily timer recording. The icon
disappears the next time the timer starts recording.
The disc was full so the program failed to record.
The material was copy-protected so it was not recorded.
The program did not complete recording because the disc is dirty
or some other reason.
Message displayed in the CHECK line
OK:
Displayed if the recording can fit in the remaining space.
→ (Date): For recordings made daily or weekly, the display will show
until when recordings can be made (up to a maximum
of one month from the present time) based on the time
remaining on the disc.
! : It may not be possible to record because:
• the disc is write-protected
• there is not enough space left
• the number of possible titles has reached its maximum.
2
Press RETURN.
• The timer recording list disappears.