Panasonic TC 22LR30 - Manual (Page 27)

27
TV Operation
STEREO SAP MONO
1
Press DISPLAY to display or remove the overlay.
TV Status & Clock Display
J U S T 1 2 : 3 4 P M C H 1 2
3 0
STEREO
SAP
MONO
1 2
3
4
5
1 Picture (Aspect) Mode
2 Current Time
3 Channel
4 Receivable Broadcast Types (see right)
5 Sleep Timer time remaining
Channel & Aspect Display
When you change channels or picture (aspect) mode, the
channel number or picture mode will be displayed.
The following are possible audio broadcast types and on-screen
displays.
1
Press DISPLAY to display the broadcast signal
being received.
MTS Stereo broadcast:
Multi-channel Television Sound Stereo broadcast. Select
STEREO audio mode.
• If stereo broadcast is weak and the display flickers, select
MONO audio mode for possible improvement.
SAP broadcast:
Secondary Audio Program (sub language).
Select SAP audio mode for the sub language.
MONO broadcast:
Normal monaural sound broadcast.
MTS Stereo and SAP broadcast:
Multi-channel Television Sound Stereo (main language) and
Secondary Audio Program (sub language) broadcasts are being
received simultaneously. Select the STEREO or SAP audio
mode.
1
Press AUDIO to select the desired audio mode as
described above.
• Each press of AUDIO will change the audio mode as shown below.
< Example >
Equipped with -TV Noise Reduction for true MTS
reproduction. -TV Noise Reduction is required for good
stereo separation and audio fidelity. is a registered
trademark, and is licensed by Technology Licensing.
Audio Mode for TV Viewing
Receivable Broadcast Types
N O R M A L
STEREO SAP MONO
STEREO SAP MONO
J U S T 1 2 : 3 4 P M C H 1 2
STEREO
SAP
MONO
J U S T 1 2 : 3 4 P M C H 1 2
STEREO
SAP
MONO
J U S T 1 2 : 3 4 P M C H 1 2
STEREO
SAP
MONO
J U S T 1 2 : 3 4 P M C H 1 2
STEREO
SAP
MONO
F U L L 1 2 : 3 4 P M C O M P O N E N T