Panasonic AG-TL950 - Manual (Page 27)

27
REC
EJECT
REC REVIEW REC
PAUSE/ STILL MENU TIME MODE
SET
ON SCREEN
SHIFT /REW PLAY FF/ REV PLAY TRACKING V. LOCK TIMER SEARCH COUNTER LOCK CNT RESET
RESET /
CANCEL
STOP
REV ADV FWD ADV
POWER
HDR
POWER
AG-
5-1 Cassette Loading/Unloading
Loading
Insert the cassette with its label side facing you.
Gently push the center of the cassette until the machine starts automatic loading.
Notes:
• To avoid damage or injury, do not insert your hand or other foreign objects into the cassette loading slot.
• For best results, use a T-120 tape.
5 PREPARATION
Unloading
5 Press the [EJECT] button.
[ The cassette is ejected.
• The tape reel counter is reset to “0000”.
If the operating mode is not on when the [EJECT] button
is pressed, operating mode is automatically switched on
and the cassette is ejected. Once the cassette is
unloaded, the operating mode turns off again
automatically.
If the Timer Recording Standby mode is engaged
(TIMER indication is shown on the display), the
cassette will not be ejected when the [EJECT] button is
pressed.
To unload the cassette, press the [TIMER] button to
release the Timer Recording Standby mode, then
press the [EJECT] button.
( ) indication
[EJECT] button [TIMER] indication
Auto operate on
When a cassette is loaded, the oprating mode
automatically turns on and the (
) cassette indication
appears.
Auto play
When a cassette with no erasure prevention tab is loaded,
playback starts automatically.
• The S-VHS indication lights up when an S-VHS cassette is inserted. During recording, the mode becomes the S-VHS mode.
• The S-VHS indication disappears when a VHS cassette is inserted. During recording, the mode becomes the S-VHS ET
mode.