Chapter 3 configure through web browser – Planet Technology Pre-N Wireless Router WNRT-610 User Manual
Page 13
Chapter 3 Configure through Web Browser
Web configuration provides a user-friendly graphical user interface (web pages) to manage your
WNRT-610.
WNRT-610 contains an HTTP server. This enables you to connect to it, and configure it, using your Web
Browser. Your Browser must support JavaScript.
The configuration program has been tested on the following browsers:
Netscape 7.1 or later. Mozilla 1.6 or later or Internet Explorer V5.5 or later
1. Open your web browser.
2. Enter the IP address of your WNRT-610 in the address field (default IP address is
3. A User Name and Password dialog box will appear. Please enter your User Name and Password here.
Default User Name is “admin” and Password is “password”. Click “OK”.
4. When the first time you enter WNRT-610, Setup Wizard will pop up. Please refer to our Quick
Installation Guide to use the Setup Wizard for initial configuration. Setup Wizard will guide you through
configuration step by step.
- 7 -