Planet Technology Pre-N Wireless Router WNRT-610 - Manual (Page 29)

3.6.9 Schedule
This Schedule can be used for the Firewall Rules and the URL filter.
Day : Each day of week can scheduled independently.
Session 1 and Session 2: Two separate sessions or periods can be defined. Session 2 can be left blank
if not required.
Start Time : Enter the start using a 24 hour clock.
Finished Time : Enter finish using a 24 hour clock
Time Zone : In order to display your local time correctly, you must select your "Time Zone" from the list.
Adjust for Daylight Savings Time : If your region uses Daylight Savings Time, you must manually
check "Adjust for Daylight Savings Time" at the beginning of the adjustment period, and uncheck it at the
end of the Daylight Savings period.
Use this NTP Server : If you prefer to use a particular NTP server as the primary NTP server, check the
checkbox "Use this NTP Server" and enter the Server's IP address in the fields provided..
If this setting is not enabled, the default NTP Servers are used.
Current Time : This displays the current time on the Wireless Broadband Router, at the time the page is
loaded.
3.7 Administratoin
Normally, it is not necessary to use these screens, or change any settings. These screens and settings
are provided to deal with non-standard situations, or to provide additional options for advanced
users.
- 23 -