Planet Technology Pre-N Wireless Router WNRT-610 - Manual (Page 34)

port number is recommended. The default value is 8080.
The port number must be specified in your Browser when you connect. See the following section for
details.
To connect from a remote PC via the Internet
Ensure your Internet connection is established, and start your Web Browser.
In the "Address" bar, enter "HTTP://" followed by the Internet IP Address of the Wireless Broadband
Router. If the port number is not 80, the port number is also required. (After the IP Address, enter ":"
followed by the port number.)
e.g.
http://210.172.99.123:8080
This example assumes the WAN IP Address is 210.172.99.123, and the port number is 8080.
You will then be prompted for the login name and password for this device.
3.7.6 Upgrade Firmware
You can upgrade your WNRT-610 with new firmware in this screen. Please follow these instructions:
1. Download the latest firmware from PLANET's website (http://www.planet.com.tw/download.php), and
save it to your disk.
2. Click “Browse” and find out the location of the downloaded file.
3. Select the file and click “Upload” to update WNRT-610 to the latest firmware.
- 28 -