8 options – Planet Technology Pre-N Wireless Router WNRT-610 User Manual
Page 28
Defaults : This will delete any Servers you have defined, and set the pre-defined Servers to use their
default port numbers.
Disable All
:
This will cause the "Enable" setting of all Virtual Servers to be set OFF.
Update Selected Server : Update the current Virtual Server entry, using the data shown in the
"Properties" area on screen.
Add as new Server : Add a new entry to the Virtual Server list, using the data shown in the "Properties"
area on screen. The entry selected in the list is ignored, and has no effect.
Delete : Delete the current Virtual Server entry. Note that the pre-defined Servers can not be deleted.
Only Servers you have defined yourself can be deleted.
Clear Form : Clear all data from the "Properties" area, ready for input of a new Virtual Server entry.
3.6.8 Options
This screen allows advanced users to enter or change a number of settings. For operation, there is no
need to use this screen or change any settings.
An example Options screen is shown below.
Respond to Ping : If checked, the wireless Router will respond to Ping (ICMP) packets received from
the Internet.
If not checked, Ping (ICMP) packets from the Internet will be ignored.Disabling the option provides a
slight increase in security.
MTU Size : Enter a value between 600 and 1500.
UPnP : UPnP (Universal Plug and Play) allows automatic discovery and configuration of equipment
attached your lan. UPnP is by support Windows ME , XP ,or later.
If enable , the device will be visible via UPnP.
If Disabled , the device will not be visible via UPnP.
Advertisement Period : Enter the desired value , in minutes. The valid range is from 1 to 1440.
Advertisement Time to Live : Enter the desired value , in hops. The valid range is from 1 to 255.
- 22 -