Planet Technology Pre-N Wireless Router WNRT-610 - Manual (Page 14)

3.1 Setup Wizard
3.1.1 Dynamic IP address
Please refer to your Internet connection method to select the Connection Type. And please configure
those settings per the information your ISP provides.
If you choose the Dynamic IP address type, click the “ Next “,you wil see the following web screen.
Connection Type: Select the connection type, Dynamic, Fixed IP, PPPoE, or PPTP from the drop-down
list.
When using Dynamic client/Fixed IP, enter the following information in the fields (some information are
provided by your ISP):
WAN IP: Select whether you want to specify an IP address manually, or want DHCP to obtain an IP
address automatically. When “Specify IP” is selected, type the IP address, subnet mask, and default
gateway in the fields. Your ISP will provide you with this information.
Copy from PC: If required by your ISP, type the MAC address for the WNRT-610 WAN interface in this
field. You can also copy the MAC address of your PC’s network card to the WNRT-610 WAN interface
by clicking “Copy from PC”.
- 8 -